2:1 INTERLACE: The precise combination of two fields of 312 1/2 lines to create a single frame of 625 lines. (CCIR)
AGC: Automatic gain control- electronic circuitry to increase the video signal in low light conditions. This usually introduces ‘noise’ in the picture giving a grainy appearance. Camera specifications should always be considered with AGC. off.
ALARM ACTIVATED VCR: From selecting ‘record’, a normal V.C.R. would take from 15 to 21 seconds before it actually starts recording usable pictures. With this type of recorder it can be set so that the tape is spooled up and ready to commence recording in about one second. The signal to go into recording can be from an alarm or any other input.
ALGORITHM: Mathematics, a rule or procedure for solving a problem
ANALOGUE SIGNAL: In video, the representation of a camera scene by varying voltages in the video signal, the voltage being directly proportional to the light level.
APERTURE: The light gathering area of a lens. The iris controls the size of the aperture.
ARMOUR: Extra protection for a cable that improves resistance to cutting and crushing. The most common material used is steel.
ASPECT RATIO: The ratio of the vertical to the horizontal image size. This is 3:4.
ATTENUATION: A term that refers to signal loss in a transmission system or light loss through a lens system.
AUTOMATIC IRIS: A lens that automatically adjusts to allow the correct amount of light to fall on the imaging device. There are a tiny motor and amplifier built in which generally receives a control signal from the camera to maintain a constant one volt peak to peak (pp) video level. There are two manual controls on the lens to allow compensation for varying conditions of ‘peak’ and ‘average’ light.
BACK FOCUS: A mechanical adjustment in a camera that moves the imaging device relative to the lens to compensate for different back focal lengths of lenses. An important adjustment when a zoom lens is fitted.
BALANCED SIGNAL: A video signal converted to a balanced signal, usually to enable it to be transmitted along a ‘twisted pair’ cable. Used in situations where the cabling distance is too great and which would produce unacceptable losses in a coaxial cable.
BANDWIDTH: The amount of space in a given part of the spectrum needed to carry communication signals.
BUFFER: The material surrounding the fibre to protect it from physical damage
BLANKING PERIOD: The period of the composite video at black level and below when the retrace occurs, making it invisible on the screen.
BLACK LEVEL: The dark parts of a video signal corresponding to approximately 0.3 volts.
BIFURCATOR: An adapter with which a loose tube containing two optical fibres can be split into two single fibre cables. (See loose tube)
C-MOUNT: The standard screw mounting for 2/3″ and 1″ camera lenses. The distance from the flange surface to the focal point is 17.526 mm. A C-mount lens can be used on a camera with a CS- mount by adding an adapter ring to reduce this distance to 12.5 mm. (See CS-mount )
CABLE EQUALISER: An amplifier to increase a video signal to the optimum value. This is usually to compensate for cable losses.
CCD: Charge coupled device, a flat thin wafer that is light sensitive and forms the imaging device of most modern cameras. Size is measured diagonally and can be 1/3″,1/2″ or 2/3″. There are two types, frame transfer and interline transfer.
CCIR: The European 625 line standard for the video signal.
CHROMA BURST: The reference signal included in the video signal after the horizontal sync pulse. This enables a colour monitor to lock on to a colour composite video signal
CHROMINANCE: The part of a colour video signal that carries the colour information.
CLADDING: The outermost region of an optical cable, less dense than the central core. Acts as an optical barrier to prevent transmitted light leaking away from the core.
COMPOSITE VIDEO: The complete video signal comprising the sync and video information. The sync pulse should be .3 volts and the video signal should be .7 volts.
CORE: The central region of an optical fibre through which signal carrying infrared is transmitted. Manufactured from high density silica glass.
CS-MOUNT: A new generation of lenses designed for, 1/2″, 1/3″ , 1/4″ and 1/8″ cameras incorporating CS-mounts. The distance from the flange surface to the focal point is 12.5 mm. CS-mount lenses cannot be used on cameras with C-mount configuration. These lenses are more compact and cheaper than the C-mount equivalents.
DESKTOP SWITCHER: A device for switching the video signal from several cameras to one or more monitors. The cables from the cameras are connected to the back of the unit.
DIGITAL SIGNAL: An analogue signal that has been converted to a digital form so that it can be processed by a micro processor.
EIA: The American 525 line standard for the video signal.
f STOP: This is the ratio of the focal length to the effective diameter of the lens. (f/A). It is not a measure of the efficiency or the transmission value of the lens. The smaller the f number the more light is passed.
fc: Foot candles used in some USA specifications to define sensitivity. 10 fc is approx. 1 lux.
FIBRE OPTIC: A very efficient method of transmitting video and telemetry signals over very long distances using fibre optic cable. Signals can be multiplexed and sent along a single fibre.
FIELD OF VIEW: The relationship between the angle of view and the distance of the object from the lens.
FIELD: One half of a frame consisting of 312 1/2 lines, 50 fields are created every second.
FLANGE BACK LENGTH: The distance from the back flange of a lens to the sensor face. This is 17.526mm for C mount and 12.5mm for CS-mount lenses.
FOCAL LENGTH: The distance between the secondary principal point in the lens and the plane of the imaging device. The longer the focal length, the narrower is the angle of view.
FRAME STORE: An electronic method of capturing and storing a single frame of video. All slow scan transmitters include a frame store that holds the picture at the moment of alarm, while the control is being dialled up. When the link is confirmed, the picture is transmitted.
FRAME TRANSFER: A type of CCD imaging device in which the entire matrix of pixels is read into storage before being processed by the electronics of the camera.
FRAME: The combination of two interlaced fields, 25 frames are created every second.
GAMMA CORRECTION: An electronic correction carried out in the camera circuitry to balance the brightness seen by the camera to that of the monitor.
GEN LOCK: Also called external sync. A separate coaxial cable is run to each camera and carries sync pulse information to ensure that all cameras are producing fields at exactly the same time. This eliminates picture bounce during switching and can improve quality and update time in multiplexers.
GRADED INDEX: (Graded index profile). A measurement shown in the form of a diagram which illustrates how the quality of glass used in this type of optical fibre alters gradually. From the densest at the core to the optically less dense cladding.
GROUND LOOP TRANSFORMER: An isolation transformer so that there is no direct connection between input and output.
GROUND LOOP: An AC current that can be produced in a cable. This is usually caused by parts of the system being fed from different electrical sources resulting in different earth potentials at each end. The result is interference on the signal.
HARDWIRED: Controlling remote equipment by direct voltage transmitted along a multicore cable from the main controller. This is very labour intensive to install and is only used in simple systems with short cable runs.
HERTZ (Hz): The number of variations or cycles per second.
ILLUMINANCE: The measurement of light in lumens per square metre, the unit of which is the lux.
IMPEDANCE: A measure of the total opposition to current flow in an alternating current circuit, measured in Ohms.
INFRA RED LIGHT: The wavelength of light produced above the visible part of the spectrum.
INFRA RED TRANSMISSION: A method of transmitting video and telemetry signals across free space along an infra red beam. This opens possibilities for using C.C.T.V. where it had been previously impossible to run cables. Distance can be limited and the signal can be degraded in adverse weather conditions.
INTERLINE TRANSFER: Another type of CCD imaging device in which the rows of charge are stepped down one at a time and processed straight away.
INTERNAL SYNC: The internal generation of sync pulses in a camera without reference to external sources. This uses a crystal controlled oscillator and is needed on non mains powered cameras.
IP RATING: Index of protection, a number combination that defines the protection afforded from outside influences by an enclosure.
IR. SHIFT: The difference in the field of view in focus between daylight and infra red light.
>dB: Decibel, a logarithmic ratio between two signals.
DEPTH OF FIELD: The proportion of the field of view that is in correct focus. The depth of field in focus DECREASES when: the focal length is longer, the f number is smaller, or the object distance is shorter.
Support: (954) 925-2127
Email: Send Us an Email
Mailing Address: 2028 Harrison St. Suite 206. Hollywood, FL 33020